Korg MMT RADIAS Owner's Manual page 115

If you select ALL and then execute the Initialize
function, the P12–1: MOD SEQ – COMN tab page
parameters and the three modulation sequencers
will be initialized.
Tab page
P12: MOD SEQ – COMN
P12: MOD SEQ – SEQ1
P12: MOD SEQ – SEQ2
P12: MOD SEQ – SEQ3
3
Change "Sure?" to "Press [YES]," and then press
the [EDIT/YES] button.
"Sure?" will indicate Completed; the modulation
sequencer settings have been initialized.
4
Press the [EXIT/NO] button.
You will return to the previous screen.
CopyModSeq
Copies the modulation sequence of another program or
timbre to a modulation sequence of the currently select-
ed program or timbre.
1
Use "Edit" to select CopyModSeq.
2
Use "Source" to select the copy-source program,
timbre, and modulation sequencer.
3
Use "Dest" to select the copy-destination modu-
lation sequencer.
4
Change "Sure?" to "Press [YES]," and then press
the [EDIT/YES] button.
"Sure?" will indicate Completed; the modulation
sequencer settings have been copied.
5
Press the [EXIT/NO] button.
You will return to the previous screen.
Parameter Value
"Last Step" 16
"SeqType" Forward
"RunMode" Loop
"KeySync" Timbre
"Resolutn" 1/16
"Knob" Pitch
"Motion" Smooth
"Value" 0
"Knob" None
"Motion" Smooth
"Value" 0
"Knob" None
"Motion" Smooth
"Value" 0
SwapModSeq
Exchanges a modulation sequence of the currently se-
lected program or timbre with a modulation sequence of
the same program.
1
Use "Edit" to select SwapModeSeq.
2
Use "Source" to select the swap-source timbre
and modulation sequencer.
3
Use "Dest" to select the swap-destination modu-
lation sequencer.
4
Change "Sure?" to "Press [YES]," and then press
the [EDIT/YES] button.
"Sure?" will indicate Completed; the modulation
sequencer settings have been swapped.
5
Press the [EXIT/NO] button.
You will return to the previous screen.
P16–4: FX (Effect Utility)
These are the effect-related utility functions.
1: Edit [CopyInsFx...NameMFxTemp]
Select the utility function you want to use.
CopyInsFx
Copies an insert effect from another program or timbre
to an insert effect of the currently selected program or
timbre.
Use "Edit" to select CopyInsFX, use "Source" to select
the copy-source program timbre, and insert effect, use
"Dest" to select the copy-destination insert effect,
change "Sure?" to "Press [YES]," and then press the
[EDIT/YES] button. (☞p.109 "CopyModSeq")
CopyMstFx
Copies the master effect from another program to the
master effect of the currently selected program.
Use "Edit" to select CopyMstFX, use "Source" to select
the copy-source program, change "Sure?" to "Press
[YES]," and then press the [EDIT/YES] button. (☞p.107
"CopyVOCODER")
MakeIFxTemp
Creates a template using insert effect settings of the cur-
rently selected timbre.
Use "Edit" to select MakeIFxTemp, use "Source" to se-
lect the insert effect, use "Dest" to select the save-desti-
nation, use "Name" to specify the name, change "Sure?"
to "Press [YES]," and then press the [EDIT/YES] button.
(☞p.108 "MakeTemplate")
NameIFxTemp
Edits the name of an insert effect template.
Use "Edit" to select NameIFxTemp, use "Dest" to select
the template number, use "Name" to specify the name,
change "Sure?" to "Press [YES]," and then press the
[EDIT/YES] button. (☞p.108 "NameTemplate")
7. Utility
109