Korg MMT RADIAS Owner's Manual page 109

MIDI channels that drive the arpeggia-
tor and step sequencers
The arpeggiator and step sequencers are driven by both
the global MIDI channel and by the MIDI channel of the
timbre that the arpeggiator and/or step sequencers are
assigned to.
Setting 1
The timbres sounded by the arpeggiator and step se-
quencers can be switched on/off by the ARPEGGIA-
TOR/STEP SEQUENCER [ON] button. While
performing, you can make them play along with the
timbres you play from the keyboard, or mute them.
When the arpeggiator and step sequencer are on
Global MIDI Ch: 1
ARPEGGIATOR
SELECT=Timbre 2
Trigger
MIDI Ch= 1ch
STEP SEQUENCER 1
SELECT=Timbre 3, Timbre 4
Timbre 1: Sounded by note-on data from Trigger MIDI
Ch=1.
Timbre 2: Sounded by note-on data sent from the arpeg-
giator.
Timbre 3: Sounded by note-on data sent from step se-
quencer 1.
Timbre 4: Sounded by note-on data sent from step se-
quencer 1.
When the arpeggiator and step sequencer are off
Global MIDI Ch: 1
ARPEGGIATOR
SELECT=Timbre 2
Trigger
MIDI Ch= 1ch
STEP SEQUENCER 1
SELECT=Timbre 3, Timbre 4
Timbre 1: Sounded by note-on data from Trigger MIDI
Ch=1.
Timbre 2: Not sounded, because the arpeggiator is not
running.
Timbre 3: Not sounded, because step sequencer 1 is not
running.
Timbre 4: Not sounded, because step sequencer 1 is not
running.
Setting 2
You can use the [TIMBRE SELECT] buttons to select a
timbre that is not assigned to the global MIDI channel
and play it from the keyboard, or use a MIDI channel
other than the global MIDI channel to enter note-on data
that will trigger the arpeggiator or step sequencer on
separate MIDI channels.
Global MIDI Ch: 1
Trigger
MIDI Ch= 2ch
Timbre 2: Sounded by note-on data sent from the arpeg-
giator.
Setting 3
If step sequencer 1 is assigned to two or more timbres
that are set to different MIDI channels, note data of the
specified MIDI channels will drive the step sequencer 1.
Timbre 1
MIDI Ch=GLB
Global MIDI Ch: 1
Timbre 2
MIDI Ch=2ch
Trigger
Timbre 3
MIDI Ch= 3ch
MIDI Ch=3ch
Timbre 4
MIDI Ch=4ch
Timbre 3: Sounded by note-on data sent from step se-
quencer 1.
Timbre 4: Sounded by note-on data sent from step se-
quencer 1.
Timbre 1
MIDI Ch=GLB
Timbre 2
MIDI Ch=2ch
Timbre 3
MIDI Ch=3ch
Timbre 4
MIDI Ch=4ch
5. Step Sequencer
Timbre 1
MIDI Ch=GLB
Timbre 2
ARPEGGIATOR
SELECT=Timbre 2
MIDI Ch=2ch
Timbre 3
STEP SEQUENCER 1
MIDI Ch=3ch
SELECT=Timbre 3, Timbre 4
Timbre 4
MIDI Ch=4ch
Timbre 1
MIDI Ch=GLB
Timbre 2
ARPEGGIATOR
SELECT=Timbre 2 MIDI Ch=2ch
Timbre 3
STEP SEQUENCER 1
MIDI Ch=3ch
SELECT=Timbre 3, Timbre 4
Timbre 4
MIDI Ch=4ch
103