Utility; P16 Utility - Korg MMT RADIAS Owner's Manual

9: DirectLvl (Direct Level)  DIRECT LEVEL 
Sets the volume level at which the modulator input
source will be output directly (unaffected).

7. Utility

Here you can use various functions provided for effi-
cient editing, such as copy, initialize, and swap (ex-
change).

P16 UTILITY

P16–1: PROG (Program Utility)
These are the program-related utility functions.
If you copy a program, you'll still need to write it
in its new location.
1: Edit [InitPROG...CopyVOCODER]
Select the utility function that you want to use.
InitPROG
Initializes the timbre, effect, step sequencer, arpeggiator,
and modulation sequencer settings of the currently se-
lected program.
1
Use "Edit" to select InitPROG.
2
Change "Sure?" to "Press [YES]," and then press
the [EDIT/YES] button.
"Sure?" will indicate Completed; the program has
been initialized.
3
Press the [EXIT/NO] button.
You will return to the previous screen.
InitVOCODER
Initializes the vocoder settings of the selected program.
Use "Edit" to select InitVOCODER, change "Sure?" to
"Press [YES]," and then press the [EDIT/YES] button.
(☞"InitPROG")
CopyVOCODER
[000...127] Copies the vocoder settings from another program to
the vocoder settings of the selected program.
1
Use "Edit" to select CopyVOCODER.
2
Use "Source" to select the copy-source program.
"Dest" indicates the copy-destination program.
3
Change "Sure?" to "Press [YES]," and then press
the [EDIT/YES] button.
"Sure?" will indicate Completed; the vocoder set-
tings have been copied.
4
Press the [EXIT/NO] button.
You will return to the previous screen.
P16–2: TMBR (Timbre Utility)
These are the timbre-related utility functions.
1: Edit
Select the utility function you want to use.
InitTIMBRE
Initializes the settings of the timbre selected by "TIM-
BRE SELECT."
Use "Edit" to select InitTIMBRE, change "Sure?" to
"Press [YES]," and then press the [EDIT/YES] button.
(☞"InitPROG")
CopyTIMBRE
Copies the settings of another timbre to the timbre se-
lected by "TIMBRE SELECT."
Use "Edit" to select CopyTIMBRE, use "Source" to se-
lect the copy-source timbre, change "Sure?" to "Press
[YES]," and then press the [EDIT/YES] button.
(☞"CopyVOCODER")
7. Utility
[InitTIMBRE...NameTemplate]
107