Configuring A Fastp Network Print Process In The Spooler Subsystem; Table 2-2. Spoolcom Commands Used To Configure A Fastp Network Print Process - HP Spooler FASTP Manual

Installing and Configuring FASTP Network Print
Processes
Configuring a FASTP Network Print Process in the Spooler
Subsystem
Spooler subsystem configuration is performed using the Spoolcom interface.
summarizes the Spoolcom commands that are used for FASTP network print process
configuration. These commands are independent of either the G-series or D-series
release version updates (RVUs). For further details about these commands, including
their complete syntax, see the Spooler Utilities Reference Manual.
Table 2-2. Spoolcom Commands Used to Configure a FASTP Network Print
Process
Spoolcom Command
OPEN
PRINT
DEV
LOC
Configuration information supplied with Spoolcom commands is maintained in a
Spooler control file used by the Spooler supervisor process and typically includes:

The FASTP network print process name

A Spooler device name for each printer

Device attributes, such as the DEVTYPE and PARM attributes

One or more job locations for each printer

Beginning with the G06.10 and D48.02 RVUs, when using FASTPTCP, you can
also include print process configuration parameters by adding a PARM attribute to
the Spoolcom PRINT command for FASTPTCP. This configuration information is
optional.
Assigning a FASTP Network Print Process Name
The FASTP network print process name is the process name which is used by the
Spooler to represent the print process. The process name is assigned in a Spoolcom
PRINT command.
Spooler FASTP Network Print Processes Manual — 427528-006
Configuring a FASTP Network Print Process in the
Configuration Task
Access a Spooler subsystem other than the default subsystem.
Specify the object code file and the process name for the FASTP
network print process. In addition, beginning with the G06.10 and
D48.02 RVUs, the PARM attribute can also specify additional
print process configuration parameters for FASTPTCP.
Specifies a Spooler device name to represent the network printer
and Spooler device attributes. DEV attributes are used by the
FASTP network print processes for print-file formatting and
device control.
Specify a job location associated with the Spooler device name.
2 - 5
Spooler Subsystem
Table 2-2