Sample Fastcnfg File For Fastpnov - HP Spooler FASTP Manual

Installation, Configuration, and Usage
Considerations for FASTPNOV
specifies whether bit translation or character substitution should occur. Refer to
Appendix A, Bit Translation and Character
bit translation and character substitution. NONE specifies that no bit translation or
character substitution should occur. The CHARSET specification is optional. The
default value is NONE.
SHADOW[n] = shadow-file-namen...
is a required attribute if tracing is enabled (that is, if bit 1 (%40000) of the PARM
device attribute is set). Each value specified defines the name of a Guardian file
used for trace output. If the file name is not fully qualified, the volume and
subvolume name default to the volume and subvolume where the object code for
the FASTPNOV print process resides. From 1 to 8 trace files can be defined.
Tracing is discussed in
TIMEOUT = interval
specifies the number of seconds a FASTPNOV print process waits before
considering an I/O operation to be a failure. The TIMEOUT specification is
optional. The default value is 0, which causes FASTPNOV to wait indefinitely or
until the I/O process for the device declares the operation a failure.

Sample FASTCNFG File for FASTPNOV

Example 5-1 contains a sample FASTCNFG file for a FASTPNOV print process:
Example 5-1. Sample FASTCNFG File for FASTPNOV
DEVICE $NOV
CONTYPE
SERVER
QUEUE
USERID
PASSWORD
Spooler FASTP Network Print Processes Manual — 427528-006
Substitution, for more information about
Section 8, Troubleshooting and Using the Trace
= NETWARE
= Sales-Server
= OrderQueue
= JohnDoe
= secret
5 - 9
Sample FASTCNFG File for FASTPNOV
Facility.