Fastkcon File Alteration; Reverting A Fastkcon File Back To A Fastcnfg File; Fastkcut Messages - HP Spooler FASTP Manual

Installation and Configuration Considerations for
FASTPTCP

FASTKCON File Alteration

FASTKCON files are altered by the FASTKCUT utility commands CREATE, UPDATE,
and DELETE.

Reverting a FASTKCON File Back to a FASTCNFG File

You also can use the FASTKCUT utility to generate a FASTCNFG file containing
DEVICE records, POLLTYPE records, and a HOSTS entry that is the equivalent of the
FASTKCON file. You might want to generate a FASTCNFG file to recreate the
FASTCNFG for further editing, or return to an older version of FASTPTCP which does
not support FASTKCON.
To generate a FASTCNFG file from a FASTKCON file, use the SAVE command as
follows:
FASTKCUT SAVE kcon-file,cnfg-file
where
kcon-file
specifies the name of the FASTKCON file to be converted back to a FASTCNFG
file.
cnfg-file
specifies the name of the FASTCNFG file to be generated.
For example:
FASTKCUT SAVE *,*
Note that the resulting FASTCNFG file will not contain any of the following:

SPOOLER, FASTCNFG, PROCESS, or MACRO commands.

Comments.

DEFAULT commands. The generated DEVICE commands will include all the
parameters for each DEVICE regardless of whether these parameters were
originally specified in a DEFAULT or DEVICE command.

FASTKCUT Messages

FASTKCUT generates messages during normal operation and also when errors are
detected. These messages are self-explanatory and are prefixed by a Knn message
code.
Spooler FASTP Network Print Processes Manual — 427528-006
3 - 52
FASTKCON File Alteration