Optional Device Attributes For Fastpsmb - HP Spooler FASTP Manual

Installation, Configuration, and Usage
Considerations for FASTPSMB
To identify the NBT or NBX domain name associated with a process, use
NBTCOM or NBXCOM. For example, for a process named $NBT, you would enter
the command:
6>nbtcom $nbt; info domain*
T8439D40^08SEP99^T27^NBTCOM^AAN
OPEN $nbt

info domain*
#DOM1 $ZTCO.#YELLOW 128.1.2.66
TYPE M NBNS 128.1.2.70 #RSCMGR = 3 *DEFAULT*
SCOPE *NONE*
The command returns the domain name #DOM1.
To identify the TLAM resource name associated with a line (for D-series only), use
the Subsystem Control Facility (SCF) INFO command. For example, for a TLAM
line named $LINE1, you would enter the command:
5> SCF;INFO DOMAIN $LINE1.*
TLAM Info DOMAIN $LINE1.#GW001
The command returns the resource name #GW001.

Optional DEVICE Attributes for FASTPSMB

The optional DEVICE attributes for FASTSMB are defined as follows:
BLOCK = data-block-size
is an optional attribute that specifies a data-block size to use for communication
with the SMB LAN print queue.
The data-block size is determined by one of the following methods:

If a data-block size is required by the SMB print server (refer to the SMB print
server documentation), you can explicitly specify the data-block size.

If you know that the SMB LAN print queue corresponds to an HP device type,
you can use the Spoolcom DEV command (the command used to define a
Spooler device name for the LAN print queue) to specify the device type. The
data-block size then assumes the default value specified in

If the BLOCK attribute is not used and the device type is not explicitly specified
by using the Spoolcom DEV command, the default data-block size is 1020.
Note. If you explicitly specify a data-block size that is not the size required by the SMB print
server, or if the default data-block size is used and it is not the size required by the SMB print
server, the size required by the SMB print server is used instead.
Spooler FASTP Network Print Processes Manual — 427528-006
Optional DEVICE Attributes for FASTPSMB
4 - 9
Table 4-4.