Trace Facility; Ems Event And 512 Messages - HP Spooler FASTP Manual

Overview of Spooler FASTP Network Print
Processes

Trace Facility

As an aid to troubleshooting, each FASTP network print process also supports the
option of writing trace data to trace files. Tracing is performed on a per-device basis
and can be enabled or disabled at any time. Trace data records information sent
between the FASTP network print process and the printer device along with
information about other processing events that can affect the device, such as Spooler
supervisor messages. For further information about the trace facility and how to use it,
see Section 8, Troubleshooting and Using the Trace

EMS Event and 512 Messages

Beginning with the G06.10 and D48.02 RVUs, FASTPTCP processes generate
tokenized event messages instead of the EMS 512 text messages generated by
FASTPTCP in previous product versions. Although most of these messages are
tokenized versions of the old 512 messages, about 15 new messages have been
added. Note the following additional information about these messages:

Previous product versions of FASTPTCP and all the other FASTP network print
processes still generate only the 512 text messages.

As a temporary measure to allow users time to adjust their EMS filters, the old
ASCII 512 text messages can be generated instead of the event messages by
setting bit 15 (%1) in the Spoolcom PRINT PARM command.
All of these messages are now described in
Spooler FASTP Network Print Processes Manual — 427528-006
Facility.
Appendix B, EMS
1 - 5
Trace Facility
Messages.