Installation, Configuration, And Usage Considerations For Fastpxns - HP Spooler FASTP Manual

7
Installation, Configuration, and
Usage Considerations for
FASTPXNS
The FASTPXNS print process allows you to use the Spooler to print documents on the
Xerox 4050 Laser Printing System and other similar Xerox high-speed printers
connected through an Ethernet network.
The FASTPXNS print process uses the following communications standards:

Xerox Network Services (XNS)

Courier protocol
The FASTPXNS environment consists of the following components:

FASTPXNS print process

FASTCNFG device configuration file
This section describes the following installation, configuration, and usage
considerations for the FASTPXNS print process:

Installation Requirements

Xerox Printer Installation and Configuration

Installation and Configuration Tasks for FASTPXNS

Spooler Configuration Considerations for

FASTCNFG DEVICE Configuration For

Installation and Configuration

Xerox Status Reporting

Xerox Start Print Command

Spooler FONT Job Considerations for Xerox

CONTROL, CONTROLBUF, and SETMODE Considerations for Xerox Printers

Where to Find Information About XNS Error
Note. This product has been tested with the following Xerox printer models: 4050, 4090, 4850,
4890 and 4135. Other printers that support XNS through an HIP task might also work with this
product; however, other models have not been tested and might vary significantly in operation.
Note. For the remainder of this section, 4050 refers to all Xerox printer types unless otherwise
indicated.
Spooler FASTP Network Print Processes Manual — 427528-006
Considerations.
FASTPXNS.
FASTPXNS.
Troubleshooting.
Considerations.
Considerations.
Messages.
7 - 1
Printers.