Command And Response Examples; Serial Command List - Runco LightStyle LS-10d Installation & Operation Manual

• www indicates the command code. This field is case insensitive; for example, PWR, pwr
and PwR are all equivalent.
• :x is the destination parameter. This is an optional parameter that indicates which
memory the command is referencing. This parameter is reserved for future use.
• z is the new value (for Set, Increment or Decrement commands) or the current value
(for Get commands) for this parameter. It can have one of two formats:
• Integer value: Any positive or negative number; for example, 100.
• String value: Any string surrounded by double quotes; for example, "This is a
string."
• [CR] is the ASCII carriage return key (0x0D).
Here are some examples of serial commands and their responses:
Command
Power query when
(PWR?) [CR]
unit is powered on
(PWR=0) [CR]
Set power to 0 (off)
Increment bright-
(BRT+) [CR]
ness from 24 to 25
(ZZZ=0) [CR]
Invalid command
Invalid parameter
(CON="Some string")
(received string,
[CR]
expected integer)
Table 6-1 lists all supported commands.
Table 6-1. Serial Commands
Setting
PCE Auto Color Enable
PCE Diagnostic Color
PCE Blue x
PCE Blue y
PCE Green x
PCE Green y
Apply Image Alignment Values
Altitude
Runco LS-10d and LS-10HBd Installation/Operation Manual
Command Data
Command Read/
Code Write
AAC R/W
AAD R/W
ABX R/W
ABY R/W
AGX R/W
AGY R/W
AIA R/W
ALT R/W
Response
(0;PWR=1) [CR]
(0;PWR=0) [CR]
(0;BRT=25) [CR]
(1;ZZZ=0) [CR]
(9;CON="Some string")
[CR]
Inc/ Min Max
Dec Value Value
No 0 1
No 0 6
Yes -100 100
Yes -100 100
Yes -100 100
Yes -100 100
No 0 1
No 0 1
83
Command and Response
Examples

Serial Command List

String? Notes
No 0 = Off; 1 = On
No 0 = White
1 = Red
2 = Green
3 = Blue
4 = Yellow
5 = Cyan
6 = Magenta
No
No
No
No
No 0 = Off; 1 = On
No 0 = Auto
1 = High
External Control