Runco LightStyle LS-10d Installation & Operation Manual page 31

10. Cursor Buttons ( ,
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
DOWN Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema -
Native
For more information about aspect ratios, refer to Table 4-1.
Note
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = DisplayPort - HDMI 8 - HDMI 7 - HDMI 6 - HDMI 5 - HDMI 4 - HDMI 3
- HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - Composite 3 -
Composite 2 - Composite 1
RIGHT Button = Composite 1 - Composite 2 - Composite 3 - Component - HD 1 -
HD 2 - SCART - HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4 - HDMI 5 - HDMI 6 - HDMI 7 -
HDMI 8 - DisplayPort
11. ENTER
Press to select a highlighted menu item or confirm a changed setting.
12. LIGHT
Press to illuminate the buttons.
13. SRC 1, SRC 2 ... SRC 14
Use these buttons to select a video source, as follows:
Remote Control Button
SRC 1 ... SRC 4
SRC 5
SRC 6
SRC 7
SRC 8
SRC 9
SRC 10
SRC 11
SRC 12 ... SRC 14
14. 3D Mode Selection Buttons:
Not used with the LS-10.
Runco LS-10d and LS-10HBd Installation/Operation Manual
, , )
HDMI 1 ... HDMI 4
Video 1 (Composite 1)
Video 2 (Composite 2)
Video 3 (Composite 3)
Component
HD 1
HD 2
SCART
Not Assigned
Source Assignment
15
Controls and Functions