Runco LightStyle LS-10d Installation & Operation Manual page 118

Specifications
Table 7-1. LS-10 Specifications (continued)
Brightness and Contrast:
Weight (without lens):
Regulatory Approvals:
Limited Warranty:
Specifications are subject to change without notice.
Cinema Standards Measurement System (CSMS)
Specifications - LS-10d
- Brightness: 52 foot-Lamberts (fL)
- Contrast Ratio: >250:1
CSMS Specifications - LS-10HBd
- Brightness: 94 foot-Lamberts (fL)
- Contrast Ratio: >200:1
These measurements are taken from the projector in a controlled,
home theater environment. All measurements are made to
ANSI/NAPM IT7.228-1997 specifications using a 1.0 gain, 84-inch
wide screen.
The foot-Lambert (fL) is the unit of measurement used in commercial
movie theaters to express image brightness at the screen surface. The
Society of Motion Picture and Television Engineers (SMPTE) specifies
16 fL as the target image brightness for film-based projectors using an
open gate (without film in the projector). More importantly, today
SMPTE specifies 12 fL as the target image brightness in Digital
Cinema theaters. The foot-Lambert measurement is dependent on
screen size, screen gain and projector light output.
Home Theater Calibration Specifications - LS-10d
- Light Output: 1,440 ANSI Lumens
- Contrast Ratio: >250:1
Home Theater Calibration Specifications - LS-10HBd
- Light Output: 2,592 ANSI Lumens
- Contrast Ratio: >200:1
These specifications are obtained by calibrating the projector as
described above for CSMS measurements.
Industry-Standard Specifications - LS-10d
- Light Output: 2,100 ANSI Lumens (uncalibrated)
- Contrast Ratio: 10,000:1 full-on, full-off
Industry-Standard Specifications - LS-10HBd
- Light Output: 3,780 ANSI Lumens (uncalibrated)
- Contrast Ratio: 1,200:1 full-on, full-off
These are typical projector brightness and contrast specifications
found in most companies' sales literature. Runco includes these
measurements in its literature to allow for direct comparison with other
manufacturers' projectors. These measurements are typically taken at
9,000K to 13,000K to get expected performance data when the
projector is used in professional, commercial and industrial displays.
40.8 lbs. (18.50 kg)
FCC Part 15 Class B, CE Class B, UL, cUL, CB, RoHS,
WEEE, local conformances as required
Projector: Two (2) years parts and labor from the date of
shipment from Runco. Extended RuncoCare™, Red
Carpet™, and PremierCare™ also available.
Lamp: 1000 hours or six (6) months, whichever comes first.
102 Runco LS-10d and LS-10HBd Installation/Operation Manual