Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003/2003 R2) - Ricoh MLP36n Manual

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server
2003/2003 R2)
• Installing this printer driver requires Administrators permission. Log on using an account that has
Administrators permission.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.
7. Select the port you want to use, and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
8. Select the name of the printer whose driver you want to install, and then click [Next >].
9. Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
10. Select whether or not to share the printer, and then click [Next >].
11. Specify whether or not to print a test page, and then click [Next >].
12. Click [Finish].
The printer driver installation starts.
13. Restart the computer to complete installation.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
Printing with Parallel Connection
1
59