Ricoh MLP36n Manual page 424

6. Monitoring and Configuring the Printer
msh> bonjour
Bonjour service name setting
You can specify the bonjour service name.
msh> bonjour cname "computer name"
• The computer name can be entered using up to 63 alphanumeric characters.
Bonjour Installation location information setting
You can enter information about the location where the printer is installed.
msh> bonjour location "location"
• Information about location can be entered using up to 32 alphanumeric characters.
Setting order of priority for each protocol
• diprint
msh> bonjour diprint {0-99}
• lpr
msh> bonjour lpr {0-99}
6
• ipp
msh> bonjour ipp {0-99}
You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher
priority.
IP TTL setting
msh> bonjour ipttl {1-255}
You can specify the IP TTL (the number of routers a packet can pass through).
• The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed when the computer is
restarted.
• location
Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
200