Cleaning The Paper Feed Roller - Ricoh MLP36n Manual

7. Cleaning the Printer

Cleaning the Paper Feed Roller

If the paper feed roller is dirty, a misfeed might occur. In this case, clean the roller as follows:
• When lifting the printer, use the grips on both sides of the printer, otherwise the printer might fall and
cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to avoid a fire or an electric
shock.
• When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing
a fire or an electric shock.
• If the printer is equipped with the optional paper feed unit, do not move the printer and unit together
as they are not securely attached.
• When lifting the printer, confirm that the optional paper feed unit is not attached to the printer.
• Do not use chemical cleaner or organic solvent such as thinner or benzine.
• Do not slide the paper tray in with force. If you do, the front and side guides might move.
7
1. Turn off the power.
2. Pull out the plug from the socket. Remove all the cables from the printer.
3. Pull out the paper tray until it stops.
132
AUB108S