Ricoh MLP36n Manual page 371

Registration
You can adjust the starting position of the printing page.
• Prt. Test Sheet
You can print the registration test sheet.
Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex Unit
• Only the installed trays appear on the display panel.
• Adjustment
You can select the start position for printing on a page.
Horiz.:Tray 1, Horiz.:Tray 2, Horiz.:Tray 3, Horiz.:Bypass, Horiz.:Dup.Back, Vert.:Std. Tray,
Vert.:Opt. Tray, Vert.:Bypass, Vert.:Dup.Back
• Only the installed trays appear on the display panel.
Curl Prevention
You can control the fuser temperature to prevent paper from curling.
• On
• Off
• Default: Off
• Use this mode only when paper misfeed occurs frequently during duplex printing.
Del. All Temp
This appears on the menu only when the hard disk is installed.
Use this function to delete all temporarily saved documents (Sample Print, Locked Print and Hold Print
data) at once.
Del. All Stored
This appears on the menu only when the hard disk is installed.
Use this function to delete all saved documents (Stored Print data) at once.
HD Format
Appears when the hard disk is installed.
Date/Time
Use this to set the date and time.
WL.LAN Signal
You can check the signal strength when using LAN.
Maintenance Menu
5
147