Extreme Networks Summit WM20 User Manual page 93

To define RADIUS servers for WM-AD global settings:
1 From the main menu, click WM-AD Configuration. The WM Access Domains list is displayed.
2 In the left pane, click Global Settings. The Authentication tab is displayed.
3 To define a RADIUS server available on the network, do the following:
In the Server Name box, type a name.
●
In the Server Address box, type the IP address.
●
In the Shared Secret box, type the password that is required in both directions. This password is
●
used to validate the connection between controller and the RADIUS server.
4 In order to proofread your password before saving the configuration, click Unmask. The password is
displayed. To mask the password, click Mask.
This precautionary step is highly recommended in order to avoid an error, later, when the Summit
WM Controller attempts to communicate with the RADIUS server.
5 To add the server to the list, click Add.
6 To remove a server, select the server in the list and click Remove selected server.
7 To save your changes, click Save.
To define admission control thresholds for WM-AD global settings:
1 From the main menu, click WM-AD Configuration. The WM Access Domains list is displayed.
2 In the left pane, click Global Settings. The Authentication tab is displayed.
3 Click the Wireless QoS tab.
Summit WM20 User Guide, Software Release 4.2
WM-AD Global Settings
93