have the same configuration, this feature will expedite deployment, as an AP will automatically
receive full configuration (including WM-AD assignment) upon initial registration with the Summit
WM Controller.
6 Wireless AP Configuration – Modify properties or settings of the Wireless AP, if applicable.
7 WM Access Domain Services (WM-AD) Setup – Set up one or more virtual subnetworks on the
Summit WM Controller. For each WM-AD, configure the following:
Topology – Configure the WM-AD.
●
RF – Assign the Wireless APs' radios to the WM-AD.
●
Authentication and Accounting – Configure the authentication method for the wireless device
●
user and enable the accounting method.
RAD Policy – Define filter ID values and WM-AD Groups.
●
Filtering – Define filtering rules to control network access.
●
Multicast – Define groups of IP addresses for multicast traffic.
●
Privacy – Select and configure the wireless security method on the WM-AD.
●
QoS Policy – Configure the Qos policy.
●
Summit WM20 User Guide, Software Release 4.2
System Configuration Overview
31