Table of Contents
Advertisement
The boxes display the IP address of the Data Collector engine. The status of the Data Collector engine is
indicated by one of the following colors:
Green – The Analysis Engine has connection with the Data Collector on that Summit WM
●
Controller.
Yellow – The Analysis Engine has connected to the communication system of the other controller,
●
but has not synchronized with the Data Collector. Ensure that the Data Collector is running on the
remote controller.
Red – The Analysis Engine is aware of the Data Collector and attempting connection.
●
If no box is displayed, the Analysis Engine is not attempting to connect with that Data Collector Engine.
NOTE
If the box is displayed red and remains red, ensure your IP address is correctly set up to point to an active
controller. If the box remains yellow, ensure the Data Collector is running on the remote controller.
Summit WM20 User Guide, Software Release 4.2
Viewing the Scanner Status Report
183
Advertisement
Table of Contents
