To configure Web session timeouts:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 In the left pane, click Web Settings The Summit Switch Web Management Settings screen is
displayed.
3 In the Web Session Timeout box, type the time period to allow the Web session to remain inactive
before it times out. This can be entered as hour:minutes, or as minutes. The range is 1 minute to 168
hours.
4 Select the Show WM-AD names on the Wireless AP SSID list checkbox to allow the names of the
WM-ADs to appear in the SSID list for Wireless APs.
5 To save your settings, click Save.
NOTE
Screens that auto-refresh will time out, unless a manual action takes place prior to the end of the timeout period.
Summit WM20 User Guide, Software Release 4.2
Configuring Web Session Timeouts
167