Table of Contents
Advertisement
4 From the Filter ID drop-down list, select Default.
The Filtering tab automatically provides a Deny All rule already in place. This rule can be modified
to Allow All, if appropriate to the network access needs for this WM-AD.
Default Filter Examples
The following are examples of filtering rules for a default filter:
Table 9: Default Filter Example A
In
Out
Allow
x
x
x
x
x
x
x
x
x
Table 10: Default Filter Example B
In
Out
Allow
x
x
x
x
Summit WM20 User Guide, Software Release 4.2
IP / Port
Intranet IP, range
Port 80 (HTTP)
Intranet IP
*.*.*.*.
IP / Port
Port 80 (HTTP) on host IP
Intranet IP 10.3.0.20, ports 10-
30
Intranet IP 10.3.0.20
Configuring Filtering Rules for a WM-AD
Description
Deny all access to an IP range
Deny all access to Web browsing
Deny all access to a specific IP
Allow everything else
Description
Deny all incoming wireless devices access to Web
browsing the host
Deny all traffic from the network to the wireless
devices on the port range, such as TELNET (port
23) or FTP (port 21)
Allow all other traffic from the wireless devices to
the Intranet network
131
Advertisement
Table of Contents
