Extreme Networks Summit WM20 User Manual page 227

Version 4.2
Hide thumbs Also See for Summit WM20:
Table of Contents

Advertisement

O (Continued)
OSPF
OUI
P
Packet
PAP
PDU
PEAP
PHP server
PKI
Summit WM20 User Guide, Software Release 4.2
Open Shortest Path First, an interior gateway routing protocol
developed for IP networks based on the shortest path first or link-state
algorithm. Routers use link-state algorithms to send routing
information to all nodes in an internetwork by calculating the shortest
path to each node based on a topography of the Internet constructed
by each node. Each router sends that portion of the routing table
(keeps track of routes to particular network destinations) that
describes the state of its own links, and it also sends the complete
routing structure (topography). Using OSPF, a host that obtains a
change to a routing table or detects a change in the network
immediately multicasts the information to all other hosts in the
network so that all will have the same routing table information. The
host using OSPF sends only the part that has changed, and only when
a change has taken place. (RFC2328)
Organizationally Unique Identifier (used in MAC addressing).
The unit of data that is routed between an origin and a destination on
the Internet or any other packet-switched network. When any file is
sent from one place to another on the Internet, the Transmission
Control Protocol (TCP) layer of TCP/IP divides the file into packets.
Each packet is separately numbered and includes the Internet address
of the destination. The individual packets for a given file may travel
different routes through the Internet. When they have all arrived, they
are reassembled into the original file (by the TCP layer at the receiving
end).
Password Authentication Protocol is the most basic form of
authentication, in which a user's name and password are transmitted
over a network and compared to a table of name-password pairs.
Typically, the passwords stored in the table are encrypted. (See
CHAP).
Protocol Data Unit. A data object exchanged by protocol machines
(such as management stations, SMUX peers, and SNMP agents) and
consisting of both protocol control information and user data. PDU is
sometimes used as a synonym for "packet''.
PEAP (Protected Extensible Authentication Protocol) is an IETF draft
standard to authenticate wireless LAN clients without requiring them
to have certificates. In PEAP authentication, first the user authenticates
the authentication server, then the authentication server authenticates
the user. If the first phase is successful, the user is then authenticated
over the SSL tunnel created in phase one using EAP-Generic Token
Card (EAP-GTC) or Microsoft Challenged Handshake Protocol
Version 2 (MSCHAP V2). (See also EAP-TLS).
Hypertext Preprocessor
Public Key Infrastructure
P
227

Advertisement

Table of Contents
loading

Table of Contents