Extreme Networks Summit WM20 User Manual page 153

If the APs are not yet known to the system, the AP will be initially configured according to AP
●
default settings. To ensure better transition in availability, it is recommended that the AP default
settings match the desired WM-AD assignment for failover APs.
AP assignment to WM-ADs according to the AP default settings can be overwritten by manually
●
modifying the AP WM-AD assignment. (For example, select and assign each WM-AD that the AP
should connect to.)
If specific foreign APs have been assigned to a WM-AD, those specific foreign AP assignments
●
are used.
An alternate method to setting up APs includes:
1 Add each Wireless AP manually to each Summit WM Controller.
2 From the AP Properties screen, click Add Wireless AP.
3 Define the Wireless AP and click Add Wireless AP.
Manually defined APs will inherit the default AP configuration settings.
CAUTION
If two Summit WM Controllers are paired and one has the Allow All option set for Wireless AP registration, all
Wireless APs will register with that Summit WM Controller.
To set the primary or secondary Summit WM Controllers for availability:
1 From the main menu, click Altitude APs. The Altitude APs screen is displayed.
2 In the left pane, click AP Registration. The Altitude APs Registration screen is displayed.
3 To enable availability, select the Paired option.
4 Do one of the following:
Summit WM20 User Guide, Software Release 4.2
Availability Overview
153