Extreme Networks Summit WM20 User Manual page 39

NOTE
All images of the Summit WM GUI in this User Guide represent the Summit WM Controller WM20. In the footer
of the Summit WM GUI, the following is displayed:
• [host name | product name | up time]
For example, [ Summit WM20| 7 days, 20:42].
• If there is no key (unlicensed), the product name will not be displayed.
• User is the user id you used to login in. For example, admin.
• Port Status is the connectivity state of the port. M represents the Management interface, which is on eth0 and
the numbered lights reflect the esa ports on the system. Green indicates the interface is up and running. Red
indicates the interface is down.
7 From the main menu, click Summit Switch Configuration. The Summit WM Controller
Configuration screen is displayed.
8 In the left pane, click IP Addresses. The factory default settings for the Summit WM Controller are
displayed.
9 In the Management Port Settings section, click Modify. The System Port Configuration screen is
displayed.
Summit WM20 User Guide, Software Release 4.2
Performing the First-Time Setup of the Summit WM Controller
39