Extreme Networks Summit WM20 User Manual page 44

Configuring the Summit WM Controller
The chart below summarizes the port types and their functions:
Table 2: Port Types and Functions
Port Type
OSPF route advertisement
Wireless AP support
Mgmt traffic support
(SNMP, HTTP, TELNET, SLP,
RADIUS, DHCP)
Routing protocol support
(IP, OSPF and PIM)
To configure the data port interfaces on the Summit WM Controller:
1 From the main menu, click Summit Switch Configuration. The Summit WM Controller
Configuration screen is displayed.
2 In the left pane, click IP Addresses. The Management Port Settings and Interfaces screen is
displayed.
The lower portion of the Summit WM Controller Configuration screen displays the number of
Ethernet ports of the Summit WM Controller:
Summit WM20 – Two Ethernet ports
●
44
Host 3rd-Party AP
No No
Yes No
Selectable Selectable
No No
Router WM-AD
Selectable. No
Route wireless
device traffic only.
Yes No
Selectable Selectable
Selectable No
Summit WM20 User Guide, Software Release 4.2