Table of Contents
Advertisement
DHCP enabled (by default, DHCP is disabled). These values are not visible for a bridged at AP WM-
AD or a VLAN bridged WM-AD with DHCP disabled (by default, DHCP is disabled).
The Address Range boxes (from and to) populate automatically with the range of IP addresses to be
assigned to wireless devices using this WM-AD, based on the IP address you provided.
To modify the address in the Address Range from box, type the first available address.
●
To modify the address in the Address Range to box, type the last available address.
●
If there are specific IP addresses to be excluded from this range, click Exclusion(s). The Address
●
Exclusion screen is displayed.
In the Address Exclusion screen, do one of the following:
●
To specify an IP range, type the first available address in the From box and type the last
■
available address in the to box. Click Add for each IP range you provide.
To specify a IP address, select the Single Address option and type the IP address in the box.
■
Click Add for each IP address you provide.
To save your changes, click Save. The Address Exclusion screen closes.
●
5 The Broadcast Address box populates automatically based on the Gateway IP address and subnet
mask of the WM-AD.
6 In the Domain Name box, type the external enterprise domain name.
Modifying Time Limits for IP Assignments
The following procedure is only applicable for configurations if the controller is the DHCP server for
users in the WM-AD—a routed WM-AD or a VLAN bridged WM-AD with DHCP enabled (by default,
DHCP is local). These values are not visible for a bridged at AP WM-AD or a VLAN bridged WM-AD
with DHCP disabled (by default, DHCP is disabled).
Time limits for IP assignments dictate the default and the maximum time limits a wireless device can
keep the DHCP server-assigned IP address.
Summit WM20 User Guide, Software Release 4.2
Topology for a WM-AD
103
Advertisement
Table of Contents
