5 To launch the backup with the selected items, click on the Backup Now button.
6 In the dialog box that is displayed, confirm the backup. The items are backed up.
To upload a new backup:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Click the Backup tab.
4 To upload a new backup, which will be added to the list, in the Upload Backup section type the
following:
FTP Server – The IP of the FTP server to retrieve the image file from.
●
User ID – The user ID that the controller should use when it attempts to log in to the FTP server.
●
Password – The corresponding password for the user ID.
●
Confirm – The corresponding password for the user ID to confirm it was typed correctly.
●
Directory – The directory on the server where the image file will be stored.
●
Filename – The name that will be given to the image file when it is stored on the FTP server.
●
Platform – The AP hardware type to which the image applies. The are several types of AP and
●
they require different images.
5 Click Upload. The backup is uploaded and added to the list.
To delete a backup:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Click the Backup tab.
4 To delete a backup from the list, in the Available Backups list, click the backup.
5 Click Delete. The backup is removed from the list.
To schedule a backup:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Click the Backup tab.
4 Click Schedule Backup. The Schedule Backups screen is displayed.
Summit WM20 User Guide, Software Release 4.2
Performing Summit WM Controller Software Maintenance
207