Extreme Networks Summit WM20 User Manual page 245

interference will not occur. If this equipment does cause harmful interference, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the transceiver antenna.
●
Increase the distance between the equipment and transceiver.
●
Connect the equipment to an outlet on a circuit different from that to which the effected equipment
●
is connected.
Consult the dealer or an experienced radio/TV technician for suggestion.
●
This equipment meets the conformance standards listed in
Table 22: USA Conformance Standards
• UL 60950-1:2001 1st Edition,
Safety
Listed Accessory
• FCC CFR 47 Part 15 Class B
EMC
• CFR 47 Part 15.247, Class C, 2.4 GHz
Radio Transceiver
• CFR 47 Part 15.407, Class C, 5 GHz
• CFR 47 Part 15.205, 15.207, 15.209
• CFR 47 Part 2.1091, 2.1093
• FCC OET No. 65 1997
Environmental
NOTE
The Altitude 350-2 AP must be installed and used in strict accordance with the manufacture's instructions as
described in this guide and the quick start guide for the device to which Altitude 350-2 AP is connected. Any other
installation or use of the product violates FCC Part 15 regulations.
NOTE
Operation of the Altitude 350-2 AP is restricted for indoor use only, in the UNII 5.15 - 5.25 GHz band in
accordance with 47 CFR 15.407(e).
CAUTION
This Part 15 radio device operates on a non-interference basis with other devices operating at this frequency when
using integrated antennas or other Extreme Networks certified antennas. Any changes or modification to the product
not expressly approved by Extreme Networks could void the user's authority to operate this device.
Summit WM20 User Guide, Software Release 4.2
Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)
Table
See Environmental Conditions.
22.
• UL 2043 Plenum Rated
FCC ID#: RJF-A3502A
Other:
• IEEE 802.11a (5 Ghz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.3af
• FCC ID: RJF-A3502A
245