Privacy For A Wm-Ad For Aaa - Extreme Networks Summit WM20 User Manual

Privacy for a WM-AD for AAA

For a WM-AD with authentication by 802.1x (AAA), there are four Privacy options:
Static keys (WEP)
●
Dynamic keys
●
Wi-Fi Protected Access (WPA) version 1, with encryption by Temporal Key Integrity Protocol (TKIP)
●
Wi-Fi Protected Access (WPA) version 2, with encryption by Advanced Encryption Standard with
●
Counter-Mode/CBC-MAC Protocol (AES-CCMP)
NOTE
In order to use WPA with 802.1x authentication, network assignment must be AAA.
To set up static WEP privacy for an AAA WM-AD:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is
displayed.
2 In the left pane WM Access Domains list, click the AAA WM-AD you want to configure privacy by
WPA-PSK for a Captive Portal. The Topology tab is displayed.
3 Click the Privacy tab.
4 Select Static Keys (WEP).
5 From the WEP Key Length drop-down list, select the WEP encryption key length:
64-bit
●
128-bit
●
Summit WM20 User Guide, Software Release 4.2
Configuring Privacy for a WM-AD
137