Table of Contents
Advertisement
Working With Third-Party APs
Step 2 – Define a WM-AD for the third-party AP port:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is displayed.
2 In the left pane, type a name that will identify the new WM-AD in the Add subnet box, and then
click Add subnet. The name is displayed in the WM Access Domains list. The Topology tab is
displayed.
3 In the Assignment by drop-down list, click SSID.
4 To define a WM-AD for a third-party AP, select the Use 3rd Party AP checkbox.
5 Continue configuring your WM-AD as described in
Captive Portal" on page
NOTE
Bridge Traffic at AP and MAC-based authentication are not available for third-party WM-ADs.
Step 3 – Define authentication by Captive Portal and RAD policy for the third-party AP
WM-AD:
1 Click the Auth & Acct tab.
2 In the Authentication Configuration screen, click Configure Captive Portal Settings.
3 In the Captive Portal Settings screen, define the Captive Portal configuration.
4 Click the RAD Policy tab.
5 Define the filter IDs to match those in RADIUS server.
170
99.
"Configuring Topology for a WM-AD for
Summit WM20 User Guide, Software Release 4.2
Advertisement
Table of Contents
