Singer XL-6000 Instruction Manual page 73

Fit the edge of frame in
Fully raise embroidery presser foot corresponding groove in
I
and place embroidery frame under it.
2
embroidery frame holder.
Embroidery
frame holder
Pressing far side of embroidery frame
with fingers, push frame into slot
located on embroidery unit until
3
frame clicks into place.
• To remove embroidery frame
Pressing holding lever of embroidery
frame holder to leftmost position, raise
embroidery frame until it comes off
from embroidery frame holder.
To embroider small fabric or edge of fabric: _
Fuse iron-on tear away type stabilizer on fabric before sewing embroidery.
After completion of embroidery, tear off stabilizer from fabric.
* Use the small or medium size frame.
• To embroider narrow fabric
such as ribbon tape:
<%__
I K:S
• To embroider corner of fabric
such as handkerchief:
• To embroider small fabric:
S-6-6% o-_,
72