How To Use Optional Settings - Singer XL-6000 Instruction Manual

How to use Optional Settings
Activate options screen using of [Guide].
Settings of error message displaying time, automatic back taking and thread trimming can be changed.
Change the setting of target item, then press
To retrieve the prevnous setting, press pictogram.
To retrieve the standard setting, press pictogram.
1. (Common settings)
• Welcome screen display:
The utility screen or embroidery screen can be directly activated by emitting
welcome screen that appears on LCD screen immediately after turning on power
switch.
• Switch acceptance sound:
It is possible to select [Sound] or [No sound] of acceptance beep produced when
you press a operating key or a pictogram on screen or perform an operation.
Buzzer that warns occurrence of an error will sound regardless of above setting.
• Stitch Count Odometer:
Your sewing machine has an Odometer that keeps track of how many stitches you
have sewn in both Standard Mode and Embroidery Mode. A count of 1 is equal
to100,000 stitches. It is a good idea to change needles every 200,000 stitches.
Clean your machine every 500,000 stitches. And have your sewing machine and
embroidery unit professionally cleaned and serviced every 3,000,000 stitches
Press pictogram to 4_
proceed to "2" on next page.
115