If Thread Breaks During Embroidery - Singer XL-6000 Instruction Manual

If thread breaks during embroidery
Stop machine and raise needle
and embroidery foot.
/
/
/
/
When needle thread has broken,
re-thread sewing machine.
When bobbin thread has broken, follow
steps described below:
[1] Cut needle thread and remove
embroidery frame from machine.
[2] Re-set bobbin thread and re-install
embroidery frame.
2
Press
pictogram.
pictos to
return needle several stitches
3
before needle breakage point.
This pictogram is used to return/advance needle by
ratio of the number of stitches with respect to total
number of stitches of pattern.
Indication of color parts on the opper screen
changes according to %.
_ pictogram returns the needle
in increments of 10 stitches. Every press on
pictogram moves the needle forward in increments
of 1 stitch. (The number of stitches corresponding
to one press on I"_] pictogram can be changed.
See page 117)
Every press on
4
Press
pictogram.
Screen returns to
previous screen.
Lower embroidery foot
6
and start the machine.
\
99