Singer XL-6000 Instruction Manual page 67

7
Install Bobbin Winder Guide. 8 Pass thread along groove.
* Intially place Guide from its far side.
*Press front of guide until it clicks in
place.
Follow the Threading Track arround all the turns and
thread points [1] though [5]. At numbered positions 1
3 lightly pull thread to assure it slips into position. At
Position 4 pull thread slightly harder to assure thread
passes under final spring. See Ste 3 9 for Step 5
Instructions.
Pull thread in direction of
arrow to cut thread.
Draw thread toward you, and thread
will be trimmed.
Remove Bobbin Winder Guide and close
1 0 cover of Endless Bobbin Compartment.
/
;\\
Press \ pictogram located
11
on upper part of LCD screen.
12
Upon completion of winding of
bobbin, bobbin thread is automatically
cut. Now, you can start embroidery
with no additional preparation.
To pause and re-start bobbin
winding while machine is engaged in
bobbin winding, press start/stop
button.
66