Automatic Threading Of Standard Sewing Machine - Singer XL-6000 Instruction Manual

ii i
iiill ii _i
iii ii_ii
Automatic Threading of Standard Sewing Machine
* Check to be sure that Face Plate Cover is closed.
* Do not open Face Pate Cover while machine is engaged in threading.
3
Face Plate Cover
4
1 Install Thread spools.
Use both hands to pull thread
2
into primary thread guide.
3
Cap Smaller spool
Cap Larger spool
Holding thread with your right
hand, thread machine head along
groove with your left hand. Pull it
in direction of arrow and cut it
with thread cutter blade "A".
1
4
Lower presser foot.
5 Press key.
6
Press
Pictogram.
* Align mark on handwheel with Now, machine starts automatic
mark on sewing machine, threading from spool through
needle eye.
* For automatic threading, use a needle of size 11 to 16 (80 to 100).
With a needle other than aforementioned one, manually thread machine head.
* When a special-purpose thread (such as invisible thread) is used, machine may fail to
perform automatic threading. In such a case, manually thread machine head.
(Refer to pages 121,122 for how to thread sewing machine manually.)
11
* If thread is left caught
on hook, remove thread
from hook before starting
sewing.