Singer XL-6000 Instruction Manual page 123

8 Thread [1] and [2] from right side.
Lower presser foot.
1 Lower threading lever.
I
[1]
Threading lever
Raise needle. Then, lower
threading lever and thread [1].
2
Thread hook.
Turnthreadleverto allow hookto be
threaded.
Caution
1. Do not lower threading lever while sewing
machine is in operation.
2. Automatic needle threading capability is
applicable to needles of #11, #14 and #16.
3
Raise threading lever.
4
Draw out thread.
When you release hook,
hook will catch needle to
thread needle eyelet.
I
Draw out thread through
needle eyelet by approxi-
mately 10 cm.
perform sewing even if no
Raise presser foot. Lightly hold
1
needle thread with fingers.
2
Turn handwheel toward you.
The needle moves up and down to draw
up bobbin thread from bobbin.
Pull out both needle and bobbin
threads by approximately 10 cm
and route them under presser
3
foot away from you.
J
122