Purl Stitch; Corded Buttonholes - Singer XL-6000 Instruction Manual

Automatic buttonholes
Purl stitch
Stitch pattern to
be selected
Same as the double
bartacking/eyelet
buttonholing
Presser foot to be
selected
o'o
Needle thread and bobbin thread interlace with each other on right side of fabric to
create a finished appearance that resembles a hand-sewn buttonhole.
Sequence of buttonholing is same
as standard buttonholes.
Select buttonholing pattern
and press pictogram.
pictogram will be
shown in reverse
* For purl stitching, you may need to set
thread tension slightly lower than that for
standard buttonholes.
Automatic buttonholes
Corded buttonholes
Sewing buttonholes
with cord inserted will
prevent buttonhole from
being enlarged and
reinforce it.
Lace yarn, button hole
twist or like can be
used as cord.
Stitch pattern to
be selected
(Medium) (Large)
Presser foot to be
selected II
_ Buttonhole
foot (E)
Routing cord on buttonhole foot
for sewing corded buttonholes.
Tie
(Upside)
Hook cord at
this point.
/ ord
(Underside)
Hook cord at top of underside of buttonhole
foot and bring down both ends of the cord and
hook them into the two slits at the lower end
of the buttonhole foot, Make a knot with both
ends of cord on the front side of the foot.
Carefully attach buttonhole foot to the ma-
chine taking care not to displace the cord.
37
sewn buttonhole and
cut off excess