Table of Contents
Advertisement
82
Use the following commands to change defaults and configure the lines and sets to suit your system requirements.
Use Installer or Administrator access codes.
Terminals & Sets
• Show set:_
• XXXX:XXXX
•• Line access
••• Line assignment
•••• Show line:______
••••• LXXX:Unassigned
••• LinePool access
•••• Line Pool A:N
••• Prime line: I/C
••• Intercom keys
••• Answer DNs
•••• Show set
•••• XXXX:Unassigned
••• OLI#
•••• OLI # as calld
•• Capabilities
••• Fwd no answer
•••• Fwd to
•••• Forward delay
••• Fwd on busy
•••• Fwd to
Modular ICS 6.1 Programming Record
These commands allow you to assign settings to each telephone (DN).
Enter the DN of the telephone you want to program.
DN number and current name displays to confirm your request.
These commands allow you to assign lines to each DN.
You can copy the settings from one DN to another.
Use these settings to determine which lines are assigned to the telephone.
You can also define how incoming calls on those lines will be handled.
Enter the numbers of the lines to be assigned to the telephone.
Assign the line by pressing the CHANGE soft key to choose how you want
the line to show on the telephone (Appr & ring, Ring only, or Appr only).
You can use the SCAN softkey to determine which lines have been assigned.
Use this menu to define which line pools a telephone, DISA DN or AutoDN
will access.
All lines except ISDN PRI lines use lines A to 0. PRI lines use PRI-A, Pri-B,
etc.
Scroll through the line pool listing and select the pools to assign to the
telephone.
This setting determines the first line selected when the user makes an
outgoing call. If you select a line or line pool as prime line, the line or line pool
must be assigned to the telephone.
Select the number of intercom buttons on a telephone for accessing internal
lines and line pools.
Enter the DN of another telephone. This set performs the indicated function
when the other set receives a call. You can assign up to five answer DNs.
Enter the DN of the telephone for which this telephone will have an answer
button.
Assign the answer DN by pressing the CHANGE soft key to choose how you
want the line to show on the telephone (Appr & ring, Ring only, or Appr only).
You can use the SCAN soft key to determine which DNs have been assigned.
Enter the 10-digit outgoing line identification number.
For some ISDN devices (for example, video conference sets) this allows the
OLI digits to replace the internal DN digits on the ISDN device call setup.
(Profile 1 and 4 only.)
These commands allow you to select the call features for a telephone.
Redirect all incoming calls when this telephone does not answer.
Enter the external number or the DN of the telephone to which you want to
redirect all incoming calls.
Select the number of rings before an unanswered call is forwarded. The
heading appears only if a Forward no answer external number or DN is
assigned.
Redirect all incoming calls when this telephone is busy with another call.
Enter the external number or the DN of the telephone to which you want calls
to be redirected when this telephone is busy.
P0603536 02
Advertisement
Table of Contents
