Nortel NORSTAR Modular ICS 6.1 Manual page 111

102
Telco features
• VMsg ctr tel#s
•• VMsg center 1
•• VMsg center 2
•• VMsg center 3
•• VMsg center 4
•• VMsg center 5
••• Use: line| routing tbl
•••• Tel#
• ONN blocking
•• Analog VSC
••• Tone
••• Pulse
•• BRI VSC
••• Code:
Software keys
• SysID
• Password keys
•• Key 1
•• Key 2
•• Key 3
Hardware
• Show module:_
• Cards on KSU
•• Cd1-KSU
••• Card type
••• Lines
••• Show lines ___
Modular ICS 6.1 Programming Record
These commands allow you to assign settings for external voice messaging
services.
These commands allow you to determine which voice message center the set
will use, and how it will access the network.
Choose the voice message center you want the set to use.
Select whether the set will access the voice message center over a direct line,
or through a routing table.
Enter up to a 24-number telephone number that accesses the voice
messaging center.
Allows outgoing name and number to be blocked at the called party end on
both analog and digital lines.
Analog Vertical service code.
Vertical service code for analog tone dialing trunks.
Vertical service code for analog pulse dialing trunks.
Basic Rate Interface Vertical service code.
Enter the BRI code.
These commands allow you to set up access to optional features and
services through Nortel Networks programming.
This number can be viewed on any M7324, M7310, T7316 or T7316E display.
Record the number. You will be asked to provide this number when you call
the Nortel Customer Response Center.
Keys are required for some system expansion activities and to activate the
remote monitoring capability. To obtain the required keys for ISDN PRI, and
fixed access trunks/WAN access for Data Modules, call the Nortel Customer
Response Center at: 1-800-684-5825.
Note: An ISDN PRI key is required for MCDN networking.
Enter the eight-digit password.
Enter the eight-digit password.
Enter the eight-digit password.
Use these commands to view and configure the Trunk Cartridges and BRI
Cards installed in the ICS.
Indicate the module you wish to view.
View and program the cartridges and cards installed in the ICS.
View the type of card that occupies the right-most slot in the ICS.
The display shows the current card type.
View the line-number range for the lines on a Trunk Cartridge.
P0603536 02