Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Option
-allsnd
-resevt
-nowait
-s <status>...

Examples

The following shows an example of the pairmon command and its output.
pairmon command example
# pairmon
Group Pair volPort targ#lun#LDEV# Oldstatcode –> Newstatcode
oradb oradb1CL1-A15145 SMPL0x00 –> COPY0x01
oradb oradb2CL1-A16146 PAIR0x02 –> PSUS0x04
Output of the pairmon command:
Group: The group name (dev_group) described in the configuration definition file.
Pair vol: The paired volume name (dev_name) in the specified group which is described in the
configuration definition file.
Port targ# lun#: The port ID, TID, and LUN which is described in the configuration definition file.
For further information on fibre-to-SCSI address conversion, see the HP StorageWorks P9000 RAID
Manager Installation and Configuration User Guide.
LDEV#: The LDEV ID for the specified device.
Oldstat: The old pair status when the status of the volume is changed.
Newstat: The new pair status when the status of the volume is changed.
code: The storage system-internal code for the specified status.
The following table specifies the results of the pairmon command options.
Table 13 Results of pairmon command options
-D -nowait
-D -
Invalid -
Invalid -
Invalid -
Invalid -nowait
Invalid -nowait
46 Replication commands
Description
Reports all events if there is pair status transition information.
Reports events if there is pair status transition information, and then resets all events.
When this option is specified, the command does not wait when there is no pair status transition
information.
Specifies the pair status transition to be reported: smpl, copy (includes rcpy), pair, psus, psue. If two
or more statuses are specified following -s, masking is done according to the logical OR of the
specified statuses. If this option is not specified, pairmon displays all events which received information
from HORCM.
-allsnd -nowait
-resevt -allsnd
- -
- -allsnd
-resevt -
-resevt -allsnd
- -
- -allsnd
Actions
When HORCM does not have an event, this option waits until an event
occurs. If one or more events exist, then it reports one event and resets
the event which it reported.
When HORCM does not have an event, this option waits until an event
occurs. If one or more events exist, then it reports all events.
When HORCM does not have an event, this option waits until an event
occurs. If one or more events exist, then it reports one event and resets
all events.
When HORCM does not have an event, this option waits until an event
occurs. If one or more events exist, then it reports all events and resets
all events.
When HORCM does not have an event, this option reports event nothing.
If one or more events exist, then it reports one event and resets the event
which it reported.
When HORCM does not have an event, this option reports event nothing.
If one or more events exist, then it reports all events.