Raidcom Add Rcu; Syntax; Options And Parameters - HP StorageWorks P9000 - Disk Arrays Reference Manual

R: Parity Group, E: External volume group
GROUP
This displays the Parity Group number or the external volume group number.
P_NO
This displays the partition number partitioning this Parity Group.
LDEV#
This displays LDEV number.
STS
This displays the following status.
-NML: this means the status of "Normal" in LDEV.
-REG: this means the status of "Registering" in LDEV.
-DEL: this means the status of "Deleting" in LDEV.
LOC_LBA
This displays the Start of LBA for this partition on this Parity Group or the external volume group,
in units of 512 bytes.
SIZE_LBA
This displays the size for this partition on this Parity Group or the external volume group, in units
of 512 bytes.
Serial#
Product serial number.

raidcom add rcu

Registers RCUs. The only registration method is the method in which no CU is specified (CU free).
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom add rcu -cu_free <serial#> <id> <pid>
-mcu_port <port> -rcu_port <port>

Options and parameters

Option
-cu_free
<serial#><id><pid>
-mcu_port <port>
-rcu_port <port>
Description
-cu_free <serial#> <id> <pid>
This parameter is used to specify CU free that is specified by Serial#, id#, pid#.
< id > is used to set RAID Type, and it can be specified the following strings.
XP12000 Disk Array/XP10000 Disk Array:R500, XP24000/XP20000 Disk Array:R600,
P9500:R700
< pid> is used to set the path group ID (1-255).
Specifies a port number of the MCU.
Specifies a port number on the RCU (storage system port on the remote side).
Specify the port that the attribute is MCU Initiator port (MCU) or RCU Target port (RCU).
raidcom add rcu 177