Raidcom Add Ldev; Syntax; Options And Parameters - HP StorageWorks P9000 - Disk Arrays Reference Manual

Changing the setting of Journal: 6. Changing the MP Blade ID of the journal to #2.
# raidcom modify journal -journal_id 6 –mp_blade_id 2
Changing the setting of Journal: 6. Instructing to store journal data in the secondary journal to the
cache.
# raidcom modify journal -journal_id 6 -cache_mode y
Changing the setting of Journal: 6. Change the path block monitoring time of Mirror ID: 1 to 59
minutes.
# raidcom modify journal -journal_id 6 -path_blocked_watch 59 -mirror_id 1

raidcom add ldev

Makes an LDEV to the specified parity group or the external volume group. Or, makes V-VOL for
Thin Provisioning/Smart Tiers/Snapshot to the specified pool.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom add ldev {-parity_grp_id <gno-sgno>| - external_grp_id <gno-sgno>
| -pool {<pool ID#> | <pool naming> | snap}} -ldev_id <ldev#> -capacity <size>
[-emulation <emulation type>][-location <lba>][-mp_blade_id <mp#>]

Options and parameters

Option
-parity_grp_id
<gno-sgno>
-external_grp_id
<gno-sgno>
-pool {<pool ID#> |
<pool naming> |
snap}
Description
Specifies a parity group number (gno:1-32, sgno:1- 1 6).
For example:
3- 1
Specifies one of the following options: -raid_grp, - external_grp_id, and -pool_id.
Specifies an external volume group number (gno:1- 1 6384, sgno:1-4096).
For example:
52- 1 1 ("E" is not required)
Specifies one of the following options: -raid_grp, - external_grp_id, and -pool_id.
Specifies a pool ID or Pool name for Thin Provisioning/Smart Tiers when V-VOL is created to
Thin Provisioning/Smart Tiers pool.
When specifying just a number, it is recognized as a pool ID. Therefore, when you specify a
pool that the pool name is only a number, operate by specifying pool ID instead of specifying
pool name. When creating V-VOL to a pool for Snapshot, specify "snap".
raidcom add ldev 151