Pairdisplay - HP StorageWorks P9000 - Disk Arrays Reference Manual

Figure 23 Example of -FMRCF option for pairvolchk
The following table shows the truth table for pairvolchk group status display.
Table 15 Truth table for pairvolchk group status display
Option
See Notes
below
-ss
NOTE:
The PFUL state appears as PAIR by all commands (except the -fc option of the pairdisplay
command), since PFUL indicates PAIR state with sidefile at the HWM.
The PFUS state appears as PSUS by all commands (except the -fc option of the pairdisplay
command), since PFUS indicates SUSPENDED state due to sidefile full.
The S-VOL_PSUS state appears as SSUS by the pairdisplay command and other commands.
This option can be used under condition when 'pairvolchk -s' has "USE_OLD_VCHK" variable.

pairdisplay

The pairdisplay command displays the pair status allowing you to verify completion of pair
operations (For example, paircreate, pairresync). The pairdisplay command is also used to confirm
the configuration of the pair connection path (the physical link of paired volumes and servers). The
pairdisplay command can be used for a paired volume or a group of paired volumes.
COPY/RCPY PSUE
Status of each volume in the group
TRUE x
false TRUE
false false
false false
false false
false false
false false
TRUE x
false TRUE
false false
false false
false false
false false
false false
TRUE x
PDUB PFUS PSUS
x x x
x x x
TRUE x x
false TRUE x
false false TRUE
false false false
false false false
x x x
x x x
TRUE x x
false x x
false x x
false TRUE false
false false TRUE
x x x
PFUL PAIR Group status
-
x x COPY/RCPY
x x PSUE
x x PDUB
x x PFUS
x x PSUS
TRUE x PFUL
false TRUE PAIR
x x COPY/RCPY
x x PSUE
x x PDUB
TRUE x PFUL
false TRUE PAIR
false false PFUS
false false PSUS
x x COPY/RCPY
pairdisplay 53