Raidcom Delete Lun; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

It is ignored if the specified LUN or LDEV already exists.
It will not be allowed to map the same LDEV to another LUN on the same host group.
It will not be allowed to overwrite the same LUN to another LDEV.
If a LUN is not specified, an empty LUN will be assigned automatically.

Syntax

raidcom add lun -port <port> [<host group name>] {-ldev_id <ldev#> [-lun_id<lun#>]
| -grp_opt <group option> -device_grp_name <device group name> [<device name>]}

Options and parameters

Option
-port <port>[<host group
name>]
-ldev_id <ldev#>
-grp_opt <group option>
-device_grp_name
<device group name>
[<device name>]
[ -lun_id <lun#> ]

Examples

Map the LDEV: 200 to the LU numbers: 1 for the port: CL1-A, the host group #0.
raidcom add lun -port CL1-A-0 –lun_id 1 -ldev_id 200
Map the LDEV: 200 for the port: CL1-A, the host group #0. The LU numbers are automatically
assigned.
raidcom add lun -port CL1-A-0 -ldev_id 200
Map the LDEV for the port: CL1-A, the host group #0, and the one belonging to the device group:
grp1. The LU numbers are automatically assigned.
raidcom add lun -port CL1-A-0 -grp_opt ldev -device_grp_name grp1

raidcom delete lun

Deletes the LU path on the host group on the specified port.
An LDEV or a device group can also be specified instead of a LUN.
If an LDEV does not exist on the specified port/host group/LUN, it will be rejected with EX_ENLDEV
or EX_ENOOBJ.
When deleting the LU path, stop the I/O for the LU path to be deleted.
In the last one path, LDEV must be specified as SMPL volume.
162 Configuration setting commands
Description
Specifies a port number.
For example:
CL1-A-g (g: 0-255)
CL1-A Linux_X86
Specifies an LDEV number (0-65279).
For example:
-ldev_id 200
Specifies the device information extracted from the LDEV belonging to the device group.
Specify "ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 32
characters) within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies an LU number (0-2047). This is unavailable to specify when the device group is
specified to operate. If the specification is omitted, a free LU number is assigned
automatically.