Error Codes; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Error codes

Unrecoverable errors are fixed and not resolved, even after re-executing the command. If the
command fails, the detailed status is logged in the RAID Manager command log ($HORCC_LOG),
even if the user script has no error handling.
Category
Volume status
Unrecoverable
Resource
Unrecoverable

Examples

Example 1
The following figure shows an example of creating a cascading configuration with -g <group>
and -gs <group> option from the local node (takeover node).
Figure 4 Creating a cascading configuration from the local node
26 Replication commands
Error code Error message
EX_ENQVOL Unmatched volume
status within the group
EX_INCSTG Inconsistent status in
group
EX_INVVOL Invalid volume status
EX_INVSTP Invalid pair status
EX_ENQSIZ Unmatched volume size
for pairing
EX_ENOCTG Not enough CT groups
in the RAID
EX_ENXCTG No CT groups left for
OPEN Vol use.
EX_ENOPOL Not enough Pool in
RAID
Recommended action
Confirm status using the pairdisplay
command. Make sure all volumes in the group
have the same fence level and volume
attributes.
Confirm pair status using pairdisplay.
Confirm volume status/attribute using
pairdisplay (-l option) or 'raidvchkdsp v aou'.
Confirm pair status using pairdisplay.
Confirm volume size or number of LUSE
volume using raidscan f, and make sure
volume sizes are identical.
Choose an existing CTGID (pairvolchk
displays CTGIDs). Use '-f async <CTGID>' or
'-m grp <CTGID>' option of paircreate to
force the pair into a pre-existing CTGID.
Confirm whether all CT groups are already
used by Continuous Access
Synchronous/Continuous Access
Asynchronous or BC/SS.
Could not retain the pool for executing a
command due to be exceeded the threshold
rate.
Delete unnecessary/earlier generations
paired volume, or re-synchronize
unnecessary/earlier generations split volume.
Value
236
229
222
228
212
217
215
206