Examples; Raidcom Check_Ext_Storage External_Grp; Syntax; Options And Parameters - HP StorageWorks P9000 - Disk Arrays Reference Manual

Examples

Mapping an LU: 0 defined to the external storage system port: 50060e80,05fa0f36 connected
to the port: CL1-A (External port) by the External Volume Group#1- 1 and the path group#1.
raidcom add external_grp -path_grp 1 -external_grp_id 1-1 -port CL1-A
–external_wwn 50060e80,05fa0f36 –lun_id 0

raidcom check_ext_storage external_grp

Specifies the external volume group, check the connection for the external VOL, and then restart
using. One external VOL is operated in one operation.
An LDEV or a device group can be specified instead of the external volume group.
If an LDEV is specified: It searches the external volume groups where the relevant LDEV belongs
to, and the result is displayed in the console window.
If a device group is specified: It searches the external volume groups where the LDEV belonging
to the relevant device group belongs to, and the result is displayed in the console window.
Example
EGRP 1- 1 (0x1-0x1) will be used for LDEV# 200
If no LDEV exists in the external volume, it is denied with EX_ENOOBJ command.

Syntax

raidcom check_ext_storage external_grp {- external_grp_id <gno-sgno> | -ldev_id <ldev#>
| -grp_opt <group option> -device_grp_name <device group name> [<device name>]}

Options and parameters

Option
-external_grp_id
<gno-sgno>
-ldev_id <ldev#>
-grp_opt
<group option>
-device_grp_name
<device group name>
[<device name>]
Examples
Executing the confirmation of existence and the LDEV recovery for the external volume #1- 1 .
raidcom check_ext_storage external_grp -external_grp_id 1-1
Executing the confirmation of existence and the LDEV recovery for the external volume group
including the external volume (LDEV:200).
raidcom check_ext_storage external_grp
Executing the confirmation of existence and the LDEV recovery for the external volume group
including the LDEV belonging to the device group: grp1.
Description
Specifies an external volume group number (gno:1- 1 6384, sgno:1-4096).
For example:
52- 1 1
Specifies an LDEV number (0-65279).
For example:
-ldev_id 200
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters).
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are oerated.
-ldev_id 200
raidcom check_ext_storage external_grp 133