Raidcom Get Resource; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

raidcom get resource

Displays resource group information.

Syntax

raidcom get resource

Options and parameters

None

Examples

Displaying a resource group and exclusive lock information.
# raidcom get resource
RS_GROUP
meta_resource
Description on each column in output example
RS_GROUP
Resource group name
RGID
This displays a resource ID.
RGID=0 is used for meta resource group.
stat
This displays the locking status of the resource group name on P9500.
Lock_owner
This displays a owner (authorized user) who locks the resource group name.
Lock_host
This displays a host name of a user who locks the resource group name.
Serial#
Product serial number.

raidcom lock resource

Locks the specified resource group name.
If the specified resource group name does not exist, it will be rejected with EX_ENOOBJ.
In authentication mode, the user executing this command must have permission for the resource
group name.
Syntax
raidcom lock resource -resource_name <resource group name > [-time <time(sec)>]
RGID stat Lock_owner
0 Unlocked -
Lock_host Serial#
- 64556
raidcom get resource 183