Raidcom Add Device_Grp; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Description on each column in output example
COPY_GROUP
Copy group name
LDEV_GROUP
Device group name that composes copy group
MU#
Mirror ID to which the device group belongs
If -mirror_id is not specified at the creation, "-" is displayed.
JID#
Journal number to which device group belongs
Serial#
Product serial number

raidcom add device_grp

Assigns a device name to the specified LDEV and creates a device group.
If the group exists, the LDEV is added to the group.
If the LDEV also already exists in the specified device group, the specified LDEV name is set.

Syntax

raidcom add device_grp -device_grp_name <ldev group name>
<device name> -ldev_id <ldev#>

Options and parameters

Option
device_grp_name
<device group
name><device name>
-ldev_id <ldev#> ...
[ -cnt <count> ]

Examples

Assigning a Device name: data1 to an LDEV: 400 and adding it to the Device group grp1.
raidcom add device_grp -device_grp_name grp1 data1 -ldev_id 400

raidcom delete device_grp

Deletes LDEVs from device groups.
This deletes the specified LDEV from the specified group.
130 Configuration setting commands
[-cnt <count>]
Description
Specifies a device group name (max. 32 characters) and a device group name in the device
group (max. 32 characters).
Specifies an LDEV number (0-65279).
If multiple LDEVs are specified, the same device name is set for all of them.
For example:
-ldev_id 200
-ldev_id 100- 1 10
-ldev_id 100 -cnt 10
Up to 64 of LDEVs can be specified.
Specifies a count (2-64).
The count becomes singular if the specification is omitted.