HP StorageWorks P9000 - Disk Arrays Reference Manual page 157

HORC: Continuous Access Synchronous Volume (P-VOL or S-VOL)
MRCF: Business Copy Volume (P-VOL or S-VOL)
QS: Snapshot Volume (P-VOL or S-VOL)
JNL: JNL Volume
THP: Thin Provisioning (THP) Volume
POOL: POOL Volume
QRD: Quorum disk
ENCD: Encryption disk
SYSD: System disk
RAID_LEVEL
It shows the RAID level.
One of RAID1, RAID5, or RAID6 is displayed.
RAID_TYPE
It shows the configuration of the drives.
2D+2D, 2D+2D×2, 3D+1P, 7D+1P, 7D+1P×2, 7D+1P×4, or 6D+2P is displayed.
NUM_GROUP
It shows the number of parity groups where the relevant LDEV is belongs to.
RAID_GROUPs
It lists up the parity groups where the relevant LDEVs are belong to.
DRIVE_TYPE
It shows the type of HDD drive where the relevant LDEV is configured.
DRIVE_Capa
It shows the capacity of relevant HDD in the number of block (512 byte) (decimal number).
LDEV_NAMING
It shows a nickname of an LDEV.
STS
It shows the status of an LDEV.
NML: Normal
BLK: Blocked
BSY: Status is changing
NONE: unknown state (not supported)
OPE_TYPE
It shows the in current operation.
FMT: Formatting
QFMT: Quick Formatting
CCOPY: Copying the collections
CACCS: Accessing to collections
NONE: Not in operation
SHRD: Shredding
ZPD: Page Discarding
OPE_RATE
raidcom get ldev 157