Raidcom Unlock Resource; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 - Disk Arrays Reference Manual

Options and parameters

Option
- resource_name <resource
group name>
[ -time <time(sec)> ]

Examples

Acquiring the exclusive lock of a resource group: meta_resource.
raidcom lock resource -resource_name meta_resource

raidcom unlock resource

Unlocks the specified resource group name.
If the specified resource group name does not exist, it will be rejected with EX_ENOOBJ.
In authentication mode, a user executing this command must have permission for the resource
group name.

Syntax

raidcom unlock resource -resource_name <resource group name>
Options and parameters
Option
-resource_name <resource
group name>
Examples
Releasing the exclusive lock of a resource group: meta_resource.
raidcom unlock resource -resource_name meta_resource

raidcom add snap_pool

Creates pools/adds pool VOLs for Snapshot by the specified LDEVs. A device group can also be
specified instead of an LDEV.
When specifying a pool that is already created for Snapshot, the specified LDEV is added as a
pool volume.
Specify either a pool ID or a pool name. If the specification of both pool ID and pool name is
omitted, it will be rejected with EX_REQARG.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
184 Configuration setting commands
Description
Specifies a name of resource group (max. 64 characters).
Only the "meta_resource" group is defined (which cannot be changed).
Specify "meta_resource".
This parameter is used for specifying the latency until the specified resource is locked.
The TOV time of the lock instruction is specified.
When <time> is specified as "0", it is executed as "nowait (no waiting time)" mode.
If this parameter is not specified, the default waiting time (7200 seconds) is used.
Description
Specifies a name of resource group (max. 64 characters).
Only the "meta_resource" group is defined (which cannot be changed).
Specify "meta_resource".